Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Using the Statistics tab of the Results Manager, you can carry out several types of statistical analyses on scenario results. For simplicity, they can be categorised into two groups:

...

Auto-generated statistics

Single result

If a single result is selected from the left-hand tree menu of the Results Manager window, the statistics tab will show univariate statistics (Figure #1). Univariate statistics provide information on a single result and are intended to summarise and reveal patterns in that result. See Univariate statistics - SRG.

For statistics for a single result, you can:

  • Choose the period type (Table 1) used to calculate the statistics from the drop-down menu;
  • Change the Water Year Start from the default date (the default is set in Project Options);
  • View the result used to calculate the statistics under Data;
  • View the statistics themselves.

Multiple results

For multiple results in a custom chart, the statistics tab shows both univariate comparison (Figure 2) and bivariate statistics (Figure 3) for two of the results in the chart:

  • Univariate comparison statistics are the same as univariate statistics for a single result, except that by default the statistics are only calculated from data that overlaps between the two results (see Table 2). To calculate univariate statistics for all data in each result, disable Calculate using overlapping data only.
  • Bivariate statistics compare two results for the purpose of determining empirical relationships between them. See Bivariate statistics - SRG Statistics.

For statistics of multiple results, you can also:

  • Toggle on or off two Statistics Options for how the two results are compared (Table 3);
  • View and change the result used as the X Data (reference) and the Y Data for statistic calculations (in Figure 2, this is Downstream Flow Volume); and
  • Select to view either Univariate Comparison or Bivariate statistics for the two results.
Table 1. Basic statistical analysis, period types
Period typeDescription
TotalProvides statistics for the entire run. This is the default period.
Yearly summaryProvides annual statistics, with one row for each year in the run.
Monthly summary

Provides monthly statistics by combining the data for each month, regardless of the year. There are 12 rows, one for each calendar month. For example, the January row displays statistics calculated from data for every January for all years in the run.

MonthxYear summaryProvides monthly statistics by month and year, with one row for each month-year pair in the run. For example, December 1999, January 2000, February 2000 ... etc.

...

ParameterDescriptionDefault
Calculate using overlapping data only
  • Sets the start and end dates to the latest common start date and earliest common end date.
  • Sets common nulls (nulls in one series are set to null in the second, and vice-versa).
Enabled
Set all N/A to 0
  • Converts any missing value to 0.
Disabled

 

Figure #1. Univariate statistics, single result.

Figure 2. Univariate statistics

...

, multiple results

...

, yearly summary

Anchor
NamingConventions
NamingConventions
Naming conventions of difference, double mass and scatter statistics

...

Statistic

Definition

Range

Values Used

The number of time steps for which there are complete data pairs ie. both the X data and Y data time series have values. These pairs are used to calculate the bivariate statistics. Time steps where either series has missing values are not used.

0 to +∞

Values not used from X

The number of time steps in the X Data series that are not used in bivariate statistics calculations because either the X data or the Y data have missing values for those time steps.

0 to +∞

Values not used for Y

The number of time steps in the Y Data series that are not used in bivariate statistics calculations because either the X data or the Y data have missing values for those time steps.

0 to +∞

Pearson's Correlation (r)

Pearson's correlation coefficient measures the linear correlation between two variables.  Pearson's correlation coefficient is symmetric, meaning that the value will be the same regardless of which time series is defined as X data (reference) and which as the Y data. See Pearson's Correlation Coefficient.

 -1 to 1

Volume Bias (%)

Relative bias expressed as a percentage. See Bivariate Statistics SRG - Relative Bias.

0 to 100

Minimise Absolute Bias

The absolute value of the relative bias. See Bivariate Statistics SRG - Relative Bias.

0 to +∞
NSE DailyThe NSE for using a daily time step.  See Bivariate Statistics SRG - Nash-Sutcliffe Efficiency.-∞ to 1

NSE Daily & Bias Penalty

The difference between NSE daily and the Bias Penalty. See Bivariate Statistics SRG - NSE Daily & Bias Penalty.

-∞ to 1

NSE Daily & Flow Duration

Combines the NSE Daily and Flow Duration using a user-defined weighting factor. See Bivariate Statistics SRG - NSE Daily & Flow Duration.

-∞ to 1
NSE Daily & log Flow DurationCombines the NSE Daily and log Flow Duration using a user-defined weighting factor. Log flow duration is the NSE of flow duration of the logarithm of data, calculated using a daily time step. See Bivariate Statistics SRG - NSE Daily & log Flow Duration.-∞ to 1
NSE Log DailyThe NSE of the logarithm of data, using a daily time step. See Bivariate Statistics SRG - NSE of Log Data.-∞ to 1
NSE Log Daily & Bias PenaltyThe difference between NSE Log daily and the Bias Penalty. See Bivariate Statistics SRG - NSE Log Daily & Bias Penalty.-∞ to 1
NSE MonthlyThe NSE using a monthly time step.  See Bivariate Statistics SRG - Nash-Sutcliffe Efficiency.-∞ to 1
NSE Monthly & Bias PenaltyThe difference between NSE monthly and the Bias Penalty. See Bivariate Statistics SRG - NSE Monthly & Bias Penalty.-∞ to 1
Square-root Daily, Exceedance and BiasCombines three terms, the sum of errors on power transformed flow, the same sum on sorted flow values, and the relative simulation bias. See Bivariate Statistics SRG - Sum of Daily Flows, Daily Exceedance (Flow Duration) Curve and Bias.0 to +∞
Figure #4. Bivariate statistics, Total period

 

Info
iconfalse
titleMUSIC volumetric ratio statistic

Anchor
MusicVolumetricRatio
MusicVolumetricRatio
In MUSIC Results Manager, is an additional bivariate statistic, Volumetric Ratio, which can be used to calculate the volumetric ratio between two flows, for example, pre and post development outflow. For each flow, the user chooses a threshold, and the area between the curve and the threshold is calculated. The ratio between these two areas is the Volumetric Ratio:

where xi is the ith value of the flow series x, xt is the user-defined threshold value for x, yj is the jth value of the flow series y, and yt is the user-defined threshold for y.

This statistic can be used to calculate several useful parameters such as Volumetric runoff coefficients and Stream Erosion Index(SEI). To calculate SEI, it is necessary to know the flow threshold (critical flow) below which no erosion is expected to occur within a waterway. This threshold can be represented (EarthTech, 2005) as a percentage of the pre‐development two-year ARI peak flow at the location in question. The percentage depends on the stream bed material and usually varies between 10 – 50%. The pre-development two-year ARI peak discharge can be estimated using flood frequency analysis or the rational method as described in Australian Rainfall and Runoff (Pilgrim, D.H., 2001). Flux Files containing the pre- and post-development outflows can be generated from MUSIC model run. SEI can be calculated by creating a custom chart in Results Manager where X data is the post-development outflow, Y data is the pre-development outflow, and both the X data and Y data threshold values are manually set to the value of critical flow using the appropriated fields next to the volumetric ratio.

Although Results Manager can calculate a volumetric ratio for any two data series, currently this statistic supports data expressed as either volume (eg. ML) or rate (eg. m3/s).

...