...
Scenario and analysis list: this box will display all the available scenarios combined with all possible run configuration analysis types in your Source project file (information on run configuration analysis types can be found at Configuring Scenarios). Only run scenario and analysis type (e.g., Manual Calibration - Flow Calibration analysis) is enabled for the selection. The user needs to select the applicable Scenario (such as Automatic Calibration) and applicable analysis type (such as Single Analysis), Multiple scenario and run analysis type combinations can be selected. Scenario and run analysis type combinations which are not relevant for a project (such as Run with warm up which is not applicable for the catchment model in this example) will not be available.
All selected recorders for all the run scenarios and analysis types in a Source project file (e.g., Manual CalibrationCalibration -Flow Flow Calibration analysis) in a Source project file will be outputted/written to the regression test sub-folder during the Test Builder, but only selected items (such as Automatic Calibration - Single Analysis in Figure 1) will will be checked during the Test Runner. Therefore, to keep regression test file size and run time to a minimum the user should preferably create very specific Source projects for regression testing – including only the scenarios and recorders required for testing.
...