Ponds and Sedimentation Basins are simply basins or waterbodies (eg. ponds, retarding basins) reliant on the physical settling of suspended solids as the principal treatment mechanism and can reduce peak flows through detaining a volume of the runoff and allowing for slower release during and after the event. Other mechanisms associated with phytoplankton assimilation of soluble nutrients and ultra-violet disinfection are currently not included in the modelling algorithm.
...
Defines the equivalent diameter of the outlet pipe (this may not be the diameter of the pipe itself, but the equivalent diameter of its orifices). The outlet pipe is notionally set with an invert at the standing water level of the permanent pool. The pond, detention basin or sedimentation basin dialogue box will display the notional detention time, based on the pond or basin volume, and the Equivalent Pipe Diameter.
| Info | ||
|---|---|---|
| ||
|
...
This button opens the Estimate Storage Properties dialogue box:
...
Re-use
There is an option to re-use water from the Sedimentation Basin, by specifying a demand. The parameters are the same as those for wetlands (refer to this page), with one exception:
Permanent Pool Volume
This value is calculated based on two parameters that were specified in the Properties for Sedimentation dialogue box - Permanent Pool Depth and Initial Surface Area.
...
Note that for a sedimentation basin, the default values for k, C* and C** for each of the constituents are as shown in the diagram above.
Threshold Hydraulic Loading for C**
...