...
You may specify No Routing or Storage (Muskingum) Routing for any link in a treatment train. If you specify no routing, you don't need any more input.
No Routing
All links are assigned No Routing by default and have the following features:
- Water enters and exits such a link in the same time step and
- There are no configuration parameters associated with No Routing links.
Storage (Muskingum) Routing
If you select Storage Muskingum Routing, enter appropriate values for the parameters k (storage constant in seconds), m (storage exponent) and x (inflow bias). Inflow bias measures the relative effect of inflow and outflow on the behavior in a reach. For more information, see Storage (Muskingum) Routing.
Outflow Components
The Outflow Components describes the outflow components that are represented by this Drainage Link. If using a 'Primary' drainage link, these outflow components cannot be altered. However, if using a 'Secondary' drainage link, the outflow components can be updated by checking or unchecking the appropriate tick box.