...
Toggles whether the Geographic Editor, Schematic Editor and Tabular Editor tabs are visible on screen. Synonym for Schematic Editor on the Scenario toolbar.
Toggles whether the Tabular Editor tab is visible on screen. Synonym for Tabular Editor on the Scenario toolbar.
...
Restores the default arrangement of Source windows. Requires an active scenario. Affects the Node PalettePalette, and the Geographic, Schematic and Tabular editors. If an affected window is undocked, it will be re-docked. If an affected window was auto-hidden, that feature will be turned off. Any affected window that has been moved will be restored to its default location.
...
Opens a configuration window for the selected analysis type where you can set parameters to control the run (eg. date-range). Synonym for Configure on the Simulation toolbar. See Running scenarios and Forecasting.
...
Launches the calibration wizard for catchments. Synonym for clicking Configure on the Simulation toolbar (or choosing ) when Select Analysis Type is set to "RR Calibration Analysis". See also Calibration Wizard for catchments.
...
Allows access to some of the plugins added using the Plugin Manager.
Allows you to add and remove plugins in Source.
...
- A compression slider. The default is low compression but there is no reason not to set the slider to its maximum value. This results in the most compact project files for almost no penalty in file load or save times.;
- Settings that enable you to control the number of decimal places that are used in various Source windows. Use the Editable Decimal Places field to adjust the number of decimal places shown in fields that you can edit. The Visible Decimals field controls the number of decimal places displayed in fields that you can not cannot edit. Neither of these settings has any effect unless the Enable rounding checkbox is turned on. Clicking Restore default values resets both decimal place fields to their default values and clears the Enable rounding checkbox.; and
- Settings that enable you to limit the number of columns displayed in the Tabular Editor. Use the Maximum Columns to Display field to limit the number of columns. Restricting the number of columns can improve performance. Click Restore default value to re-apply the system default of 1000 columns.
...
- Create new projects and scenarios. The commands found here are synonyms for and , and New Scenario on the File toolbar.;
- Open recent projects. You can also find a list of recent projects at .
- Find more information about Source capabilities, news and release notes.; and
- Access user guides and links to online training and other useful materials.
...
Moves the layer selected in the Layer Manager higher up in the layer appearance order.
...
Moves the layer selected in the Layer Manager lower lower down in the layer appearance order.
...
Removes the layer currently selected in the Layer Manager from from the geographic view.
Figure 12. Ordering toolbar
...
Removes the scenario that is selected in the Project Hierarchy. You are prompted to confirm the deletion. Deletions can not cannot be undone.
Recording Options
...
- Record All - records all of the parameters under this level of the hierarchy when the model is run. The recorded results will be visible in the Recording Manager window. See Running scenarios; and
- Record None - records none of the parameters under this level of the hierarchy when the model is run.; and
- The Recording Defaults... option opens the Set Recording Defaults dialog where you can define a set of recording options that will be applied to all of your Source projects by default.
...
Geographic Editor
Toggles the state of the Geographic View tab. Synonym for .
...
Layer Manager
Toggles the state of the Layer Manager window Layer Manager window. Synonym for .
...
Location Control
Toggles the state of the Location Control dockable window.
Node Palette
Toggles the state of the Node Palette. Synonym for .
...
Schematic Editor
Toggles the state of the Schematic Editor tab. Synonym for .
...
Tabular Editor
Toggles the state of the Tabular Editor tab. Synonym for .
...
Display Grid
Controls whether the Schematic Editor displays a grid on the drawing canvas.
...
Controls whether nodes are aligned with the underlying grid in the Schematic Editor.
Set Grid Size
The value in this field determines the frequency of grid lines in the Schematic Editor. The units are in pixels.
...
Print (Schematic Editor grid toolbar)
Formats the Schematic Editor for printing and opens the Print preview dialog.
Save as Image (Schematic Editor grid toolbar)
Prepares the Schematic Editor for saving in JPEG format.
...
The representation of any link can be controlled independently using the contextual menu in the Schematic Editor. Right-click the link and choose one of the options in the Link Type sub-menu.
...
This button controls whether the names of nodes are shown in the Schematic Editor. Source defaults to displaying node names.
...
This button controls whether the names of links are shown in the Schematic Editor. Source defaults to displaying link names.
...
This button controls whether the Schematic Editor always scrolls to show components as they are selected in the Project Hierarchy. The default state of this button is off. In this mode, Source leaves the Schematic Editor window unchanged, regardless of any selections you may make in the Project Hierarchy.
If you turn Track on, the Schematic Editor window will scroll to bring into view any node or link that you select in the Project Hierarchy. You can use this feature to locate components in large models.
...
- Tool tips on - when selected, clicking on any node in the Schematic Editor causes a small floating window to appear which contains additional information about that node.
- Tool tips off - when selected, the floating windows do not appear.
- Tool tips locked - when selected, clicking any node in the Schematic Editor causes a small floating window to appear next to every node.
...
Selects the type of analysis to be performed. Synonym for > . The options are:
- Flow Calibration analysis, which derives the "best" set of parameter values so that output from the model matches an observed data set;
- Run w/Warm Up, which seeds the model with the available historical data and prepares for forecasting. See also Incorporating uncertainty into climate variability;
- Single analysis, which simulates the river performance for a single set of conditions (as opposed to an iterative analysis which considers several possible outcomes); or
- Stochastic analysis, which is used when dealing with stochastic climate data. Refer to Calibration Wizard for catchments.
...
Opens a configuration window for the selected analysis type where you can set parameters to control the run (eg. date-range). Synonym for
...