...
- "Pre Entry" -> PreEntry When first entering the RAS Pre phase
- "Pre Pre Triggers" -> PrePreTriggers In RAS Pre just before triggers are fired
- "Pre Post Triggers" -> PrePostTriggers In RAS Pre just after triggers are fired
- "Pre Exit" -> PreExit At end of RAS Pre phase, just before the Order / Demand and Flow Distribution phases
- "Post Entry" -> PostEntry When first entering the RAS Post phase
- "Post Pre Triggers" -> PostPreTriggers In RAS Post just before triggers are fired
- "Post Post Triggers" -> PostPostTriggers In RAS Post just after trigger are fired
- "Post Exit" -> PostExit _At end of RAS Post phase before the end of timestep
Note: If no time-step descriptor is provided it should be assumed that the value is from "Post Exit" as this is the historic recorder phase. The only exceptions to this are "Account Balance", "Available Water in Account Balance", "Carryover", "Available Water in Carryover" , "Available Water" and "Total Water Accounts" which are sourced from the "Post post Triggers" phase but before carryover triggers.
...
Total Carryover Start Of Water Year: Total amount of carryover start of water year from all accounts. Only available at system level.
Total Carryover Balance Post Trigger: Total carry over balance from all accounts in post post trigger phase. Only available at system level.
...
Effective Allocation = min (maximum effective allocation, (carryover start of water year + total allocation water year - spill reduction water year) / Entitlementnumber of shares)
Forfeit End of Water Year:
...
Max WDD: Maximum amount of without debit diversion. Non-debit accounting are designed for particular river systems (Murray, Murrumbidgee, Babubula and Upper Namoi) in New South Wales. Different river system has different rules for water diversion under no- debit accounting. For more details, please go to annual accounting SRG.
Number of Shares: A A right to take/use/extract/have water delivered over a water year.
...
Account Balance Spill Reduction: not sure this one? also 0??
Account Type Spill Volume: This is a user defined spill volume for an account type. Modeler can specify spill volume from Carryover tab under account type level in annual accounting system.
Total Account Spill Reduction: Total amount Sum of spill reduction from all accounts for each time stepwithin the RAS in the current time step, sourced from RAS Post phase after post triggers (Post Post trigger) but before Sum of spill reduction from all accounts within the RAS in the current time step, sourced from RAS Post phase after post triggers (Post Post trigger). Only available at system level.
Total Account Spill Reduction Water Year: Spill reduction Priority: Priority order of spill Total amount of spill reduction from all accounts form start of water year to current time step. Only available at system level.
Spill reduction Priority: Priority order of spill deducted from a account type. An account type with priority of "1" will have spill deducted before an account type with priority of "2". Only available at account type level
...
Total Account Adjustment Water Year: Accumulative accounts adjustment from start of water year to current time step.
Total Allocation Water Year: Total amount of water that has been allocated to an account in a water year. The allocation is Account Adjustment: Sum of balance in all accounts' Account Balance components within the RAS in the current time step, sourced from RAS Post phase after post triggers (Post Post trigger).
Total Allocation Water Year: Total amount of water that has been allocated to an account in a water year. The allocation is made again entitlements throughout a water year.
...
Total Usage Water Year: Accumulative usage from both allocation accounts and carryover accounts from start of water year to current time step. Without debit water repayment is deducted from allocation accounts and it is also included in total usage water year.
Total Usage: This is usage of water from both allocation accounts and carryover accounts per each time step. Only available at system level.
Total Water accounts: Sum of remaining water from all accounts from start of water year to current time step. Only available at account types, account hosts and system level. Post post trigger phase but before two carryover triggers.
...
Percent Per Share Entitlement = Allocation Volume / Entitlement
Active Storage
Available Resources
Carryover Total Reassessment
Commitments
Emptied On Spill
Forecast Inflows
Other Resources
Spill Volumes
Total Emptied
Available Storage Volume
Evaporation to End of Season
Inflow to End of Season
Net Evaporation Volume to End of Season
Volume Druing Assessment: Active volume of water stored in storages, can be allocated to water users. Dead storage is not included.
Available Resources: Total available water resources that can be allocated to water users. It can include active storage volume, forecast inflows, other resources that will be transferred into and so on. for more details, please go to annual accounting SRG.
Commitments: This is the part of resources that is needed to be set aside for other purpose, such as reserve for environmental flow or needs to be supplied to other water users. It should be subtracted from available resources.
Forecast Inflows: This is the forecast inflows that could be added to available resources for allocation reassessment. For unregulated inflow which did not flow into any storage, a recession factor is usually assigned to it before it being added to available resources.
Other Resources: This is to consider other available resources, such as transferred water, which could be added to available resources reassessment.
Carryover Total Reassessment: looks like the same as carryover start of water year??
Spill Volumes: The amount of annual accounting system spill volumes based on user defined function in the "Spill Volume" field under the RAS's "Configuration" tab. Should it be spill volume from accounts rather than decided by the function??
Emptied On Spill: Not sure??? It is different from Total Emptied, one year lag and double the value of spill volume.??? a bug??
Total Emptied: Total emptied on spill from carryover. This recorder keeps track of spill reduction that are based on method of "Emptied on Spill or Pre-Release". rename to Total emptied on spill??
Available Storage Volume: This is the storage volume that are available to be allocated to water users. Inactive volume in storage (dead storage volume) and evaporation are not included.
Evaporation to End of Season: Total evaporation (mm) from current time step to end of water year. ( Evaporation in RAS "Configuration" tab, not the one on storage node)
Inflow to End of Season: Total inflow from current time step to end of water year (Inflow in RAS "Configuration" tab, not the one on storage node)
Net Evaporation Volume to End of Season: Total evaporation volume (ML) from current time step to end of water year.( Evaporation in RAS "Configuration" tab, not the one on storage node)
Volume Druing Assessment: total storage active volume ( before adding inflow or subtracting evaporation ) that can be used for resource reassessment . Storage inactive volume is not included.