You can edit the properties of the source node by:
- Double-clicking the left mouse button over the source node icon; or
...
Navigating Through the Dialogue Boxes
You can click on any tab and and can edit any of the data presented on in the active dialogue box. The Source Tab
...
The Source contains 3 options:
- Generate: default option which generates both runoff and contaminants based on the provided parameters
- Custom Flow and Generate Contaminants: this allows you to import flow time series data, resulting in the stochastic generation of constituents
- Custom Flow and Contaminants: this allows you to import time series data of total runoff and associated contaminants
Generate
This Tab contains Land Use/Zoning type, the total area, and the percentage of impervious and pervious area for that source node. It also contains the hydrologic parameters used by the rainfall-runoff model. For more information on model structure, operation and suggested parameter ranges see Rainfall Runoff Modelling.
Land Use/Zoning Type
For source nodes, select the zoning or surface type. This will change the water quality parameters used in the generation of pollutants from the source node to values appropriate for that zoning or surface type. See below for more details.
...
The area information forms part of the input to MUSIC’s rainfall runoff model, derived from a model developed by the CRC for Catchment Hydrology (Chiew & McMahon, 1997). For a diagram of the model structure and a brief description of its operation, see Appendix A : - Rainfall-Runoff Modelling. Further guidance on setting appropriate parameters for the rainfall runoff model is contained in the Appendices, especially for parameters specific to particular regions.
...
Each component of runoff is calculated using the information above and a daily time-step. Each component is then disaggregated to the required time-step, using the detailed rainfall pattern and a technique appropriate to that component. For more information on disaggregation see Appendix A : - Rainfall-Runoff Modelling.
...
Water Quality Parameter Dialogue Boxes
...
| Info | ||
|---|---|---|
| ||
|
Custom Flow and Generate Contaminants
Custom Flow and Generate Contaminants option as shown in the figure below allows you to import flow time series data, resulting in the stochastic generation of constituents.
Custom Flow and Contaminants
There are many situations where you may need to create a node in music which uses imported time-series data (flow, TSS, TP, TN and gross pollutants). It may be used for creating custom-made source nodes, or treatment nodes. For example, you may want to:
- Import observed (monitored) flow and water quality data at the inflow and/or outflow of a treatment node (e.g. a wetland), to allow you to calibrate the wetland’s treatment performance to the observed data.
- You may wish to simulate a ‘non-standard’ source of pollutants (e.g. a sewerage treatment plant, that has variable flow and water quality characteristics), for which you have monitoring data
- You may wish to use monitored streamflow and water quality to create a "receiving node" into which a music simulation discharges, to allow you to monitor your proposed treatment train’s performance against water quality standards.
To create such node, you can choose Custom Flow and Contaminants option in Source node which will allow you to import Total flow along with contaminant time series data as shown below:
