The process for undertaking a life cycle costing analysis using music MUSIC for rainwater tanks is the same as described in Life-Cycle Costing - Constructed Wetlands.
The origin of all of the 'expected' ‘expected’ values and algorithms in MUSIC's MUSIC’s costing module, as well as the statistical operations used to generate 'upper' and 'lower' ‘upper’ and ‘lower’ estimates for rainwater tanks are explained in Table 1.
Note that the CRC for Catchment Hydrology's Hydrology’s survey used to gather real costing information for rainwater tanks from around Australia and to develop the 'size ‘size / cost' cost’ relationships in Table 1 only involved data from small to medium sized galvanized, colorbond, zincalume and aquaplate aboveground above ground tanks of various shapes. Costing information for polyethylene (plastic) tanks is provided in Taylor (2005b), Costing Information and Appendix H: Costing information and from several Australian rainwater tank suppliers' suppliers’ web sites.
Table1Table 1. Summary of cost-related relationships for rainwater tanks.
Element of Life Cycle Costing Model | Default Option for Estimation in | musicMUSIC | Alternative(s) | Notes | ||||
|---|---|---|---|---|---|---|---|---|
Life cycle | 25 years. | No alternative in musicMUSIC. | Default value from Melbourne Water (2003) and relevant to metal, aboveground tanks. Estimates vary from 10 to 100 years depending on tank materials. It is recommended that users contact their tank suppliers to estimate the life cycle if they have a specific type of tank in mind. Upper and lower estimates have not been provided in musicMUSIC. | |||||
Total acquisition cost (TAC) | TAC/kL ($2004/kL) = 1,354 x e[(-0.1589) x • (Vol)] R2 = 0.63; p = <0< 0.01; n = 35. Where: Vol = volume of tank (kL or m3); and e = 2.718. | No alternative size / cost relationships in musicMUSIC. For literature values, see Taylor (2005b) ' - Included in Appendix H or contact tank suppliers.* NB: Appendix H includes some approximate acquisition costs for plastic tanks (i.e. 0.5 to 48 kL in size) |
TAC includes plumbing and installation costs (i.e. to connect tanks to toilets or hot water systems) but not GST. Note that an unexpected finding from the CRCCH dataset is that the predicted TAC costs rise as the tank size moves from 1 to 6 kL in size (as expected), but then slightly falls from 6 to 10 kL (unexpected). Upper and lower estimates derived using a 68% (or 1 standard deviation) prediction interval for the regression. | |||||
Typical annual maintenance (TAM) cost | TAM ($2004) = 90. | No alternative size / cost relationships in musicMUSIC. For literature values, see Taylor (2005b).* | Upper and lower estimates have not been provided in music MUSIC due to limited data. This TAM estimate is based on: $75 for annual maintenance (from Kuczera and Coombes, 2001), scaled to $2004 using an annual inflation rate of 2%, plus $10 per year for operation and maintenance cost associated with pumps. Estimated using information from: Gardner (2004) and Grant and Hallmann (2003) on electricity use and cost that when combined, indicate pump running costs are typically $0.41 per kL; and Duncan (2004) who suggested a typical residential water usage rate for rainwater tanks would be approximately 20 kL per year. This TAM estimate assumes the tank is plumbed into a house (e.g. for toilet flushing) or the garden and includes a pump. | |||||
Annualised renewal / adaptation cost (RC) | RC ($2004) = $0 | No alternative size / cost relationships in musicMUSIC. | Assumed to be minor and included in TAM. | |||||
Renewal period | N/A (as RC = $0) | |||||||
Decommissioning cost (DC) | DC ($2004) = $200 | No alternative size / cost relationships in musicMUSIC. | Estimate obtained from a NSW plumber as no data was found in the literature. Given the low cost and effect of discounting in the life cycle analysis, the influence of any error associated with this estimate will be negligible. | |||||
General caveats / notes for this type of device | * Up to date acquisition cost estimates for rainwater tanks are easily obtained from the internet or directly from tank suppliers (for a list of suppliers see www.wsud.org/wsud.htm). This industry is rapidly evolving in Australia, so obtaining current estimates is recommended. | |||||||