Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Repair Jira Macros

...

3)  IQQM Crop Model SRG, used in NSW and QLD.

In addition, Melbourne University as part of the eWater CRC, undertook a number of years of research looking at how to improve demand modelling. A prototype irrigation demand model (NGenIrr) was developed as part of this research. The Irrigator demand model was developed by combining the best functionality from the existing models into a common demand model. A key focus was on keeping the model as simple and parsimonious as possible, while not compromising the key functional requirements.

...

Crop water use occurs at potential rates until soil depletion equals the readily available water (RAW) (Figure 2). RAW is defined as in FAO56 (Equation  4) .The water stress coefficient (Ks) defines crop water use response relative to soil water depletion (Equation  5). Ks decreases linearly from 1 when soil depletion exceeds RAW to 0 at soil depletions levels greater than TAW (Figure 2). When Ks falls to 0.05, the crop is assumed to die. When the crop dies, the area is returned to fallow and no more irrigation requirements are generated for this crop. The crop can only be re-established if triggered by a new planting decision.

Info

The crop water stress (Ks) and available water asymptote to 0, meaning the actual crop water use progressively reduces as the crop gets more stressed.  It therefore takes a long time for the crop water stress coefficient to reduce to 0.05 and cause crop death.


Readily available water is defined by:

...

Crop evapotranspiration is calculated using the single crop coefficient approach described in FAO56 (Equation  6). Crop coefficients at various growth stages can be modelled in Source as described in the Irrigation Demand Model Crop Factors SRG entry. Alternatively, Source also offers sufficient flexibility to apply daily crop factors if they are known for a particular crop based on a different source or method.

...

The underirrigation factor is used to change the target soil depletion to achieve a reduction in water use compared to potential. The factor refers to the percentage of the tension water (RAW - TAW) when it is larger than zero.  The underirrigation is only assessed on planting decision day and remains the same throughout the planting period. This option may be used where you are trying to keep a crop alive and not maximise production ie. stressing the crop and getting a reduced yield.

...

TargetDepletionRegulated is target soil water depletion (mm)


Underirrigation Factor replaces
Info

The model will ignore the functions of

Jira Legacy
showSummaryfalse
serverSystem JIRA
serverIda22b5711-2728-3bcc-860f-2832d905a432
keySD-547
Soil Depletion Target and Target Modifier when it the underirrigation is greater than zero. 

Planting Decision Reassessment Trigger

...


ParameterDescriptionUnitDefaultTypical Range
1

Decision Type

Allows user to select different methods for specifying the crop area on the planting date. Either a fixed area (which supports functions and data sources) or a lookup table that relates available water on the planting date to the planted area.


Fixed Area


2

Plant Date

Date that the planting decision is made and the crop is planted

Calendar date

31 May

1/1-31/12

3

Harvest Date

Date crop is harvested. By default this is disabled

Calendar date

n/a

1/1-31/12

4

Underirrigation Factor

Reduces irrigation application by changing the target depletion level.  When it is zero or negative  it is inactive and when it is >0 it replaces the Target Soil Depletion>0  the functions of Soil Depletion Target and Target Modifier will be ignored.

%

0

0-50

5

Area relationship

Defines the crop area as a function of either available water using a lookup table or from a function or data source

ML vs ha

Fixed area

3-14 ML/ha

...