Incorporating uncertainty into climate variability
...
The Source Stochastic Analysis tool contains a model for the generation of daily rainfall data for multiple sites using the transition probability matrix (with Boughton’s correction). Stochastic climate data can be used as inputs into hydrological and ecological models to quantify uncertainty in environmental systems associated with climate variability. Additional stochastic data generation models will be added to the Stochastic Analysis tool in the future. For a detailed description of the multi-site, daily rainfall generation model refer to the Scientific Reference Guide.
...
- In the Simulation toolbar, change the analysis option to Stochastic Analysis; and
- From the main toolbar, click Prepare to Run.
- Click Configure
The Stochastic Configuration dialogue opens (Figure 1). To begin the analysis:
- Define the Start and End years;
- Specify the number of replicates to run. The default is 20;
- Click OK; and
- In the Simulation toolbar, click Run.
The Stochastic Analysis tool will automatically load the rainfall data that is being used by the scenario, and then stochastically generate rainfall replicates for each sub-catchment.
Figure 1. Configuration, Stochastic
...
Analysis
...
The Stochastic Analysis tool may take some time to complete, depending on the number of sub-catchments, replicates, number of recorded variables and type of rainfall data used in the scenario. Generally, the more complex the model or scenario, the longer the stochastic generation of rainfall data will be.
To produce valid results when comparing statistics from the generated and historical data, the replicate length and the historical input data length must be the same. To properly capture sampling variability, you should also generate at least 100 replicates. |
Once the Stochastic Analysis tool has finished, the modelled flow and constituent parameters appear in the Recording Manager and can be viewed by selecting the parameter of interest in the right-hand column of the Recording Manager. The new Results Manager, which is the default viewer for single analysis, does not currently support stochastic analysis outputs.
However, the individual time series produced during a Stochastic Analysis run can be streamed direct to disk while the model is running. Before initiating the model run, go to Edit>>Scenario Options>>Simulation Results and tick on the option to Export Results After Run (Figure 2). This will stream a .res.csv file to the chosen folder on the hard drive, which can then be opened in Excel or viewed in any text editor. Be aware that the Stochastic Analysis tool can potentially generate very large amounts of data and so this may be a very large file.
Figure 2. Stream outputs to disk
Viewing and assessing statistical results
A list of all available statistics is displayed in the top, middle window under Statistics. To view a particular statistic, select it under Statistics to view the data as a box and whisker plot, which shows the spread of data. Figure 2 3 shows the monthly mean plot for one of the nodes in the model.
Figure
23. Box plot of mean monthly flow replicates
Figure 3 shows how a box and whisker plot represents the distribution of data.
Figure 3. Box and whisker plot
A new screen appears with the stochastically generated flow and constituents replicates and statistical outputs (Figure 45).
Figure
...
5. Stochastically generated flow replicates
Limitations and cautionary notes
Although stochastic hydrology is a mature science, new stochastic models are continually being developed, usually with marginal improvements on previous models. The modelling approach for generating stochastic rainfall data has been selected because of available expertise, the model’s robustness, along with extensive and successful model testing using data from across Australia.
A basic understanding of stochastic climate data is required to properly use stochastic data with hydrological and ecological models to quantify uncertainty in environmental systems associated with climate variability. The user should consider the following questions when designing a stochastic and hydrological modelling study:
|
The Stochastic Analysis tool can take a long time to run, particularly when applied to large catchments and when you have specified many replicates (ie over 100). Such applications can take several hours to run. Therefore, when first designing a scenario with stochastically-generated rainfall data, keep the following in mind:
- Perform a "dummy" run with only a few replicates (< 20) to assess whether or not the stochastically-generated data is being generated properly;
- Be specific about what you need to record. If the flow that is coming out of the catchment outlet is of particular interest, then only record the catchment outflow when using the Stochastic Analysis tool. All other parameters and reporting options can be set to Record None. This will reduce the repeat run time and reduce the size of the generated output data; and
- Make note of how many years of data you want to generate climate data for. Although it is desirable to use as much data as possible, only use what you need to get a satisfactory model result.
As a general rule, the input data should have at least 20 years of historical climate time-series data. As an absolute minimum, the stochastic analysis requires a climate record of 5 years. Longer data is used to improve the calibration of the stochastic model to the characteristics of the historical time series. In addition, the model needs to be configured with at least two distinct time series inputs. |