The Agricultural Runoff rainfall-runoff model allows the user to implement the functionality of the Irrigator Demand Model as a rainfall-runoff model at the Functional Unit level. It is used to represent cropping areas in sub-catchments which are rain-fed and are not part of a command area which receives water from a dam (regulated irrigation). The model contains one water balance parameter and three routing parameters.
Scale
The Agricultural Runoff rainfall-runoff model is a catchment scale model and operates at a daily time step.
Principal developer
The implementation of the Irrigator Demand Model as a rainfall-runoff model was undertaken by eWater Ltd.
Scientific Provenance
See Irrigator Demand Model - SRG
Version
Source version 4.2.1 and higher
Dependencies
None.
Availability
Automatically provided with Source.
Theory
The Agricultural Runoff Rainfall-Runoff model allows the user to implement the functionality of the Irrigator Demand Model as a rainfall-runoff model to represent rain fed cropping areas in sub-catchments. With some additions and exceptions, the same theory and assumptions underpinning the Irrigator Demand Model are also relevant to the rainfall-runoff model version. Beyond the parameters which are set up in the Rainfall-Runoff table, the Agricultural Rainfall-Runoff model is configured with the same options as those of the Irrigator Demand Model options. The Feature Editor column in the Rainfall-Runoff Model table is used to access and configure these.
Also available is the option to add flow routing to return flows, to represent the function of routing parameters in standard rainfall-runoff models. The Linear Storage Routing parameters Ts, Tq and Vs use the same algorithms as the Ts, Tq and SFI parameters described in the IHACRES-CMD - SRG, except that effective rainfall U is replaced with return flow at the point it leaves the water user.
There are four model parameters which are available for calibration and are set up in the main Rainfall Runoff (RR) Model table interface.
Agricultural Runoff Model parameters:
Parameter | Description | Units | Default | Min | Max |
Ts | Time constant governing the rate of recession of slow flow (Ts > Tq) | Time step | 10 | 1 | 100 |
Tq | Time constant governing the rate of recession of quick flow | Time step | 1 | 1 | 10 |
Vs | Proportion of slow flow to total flow | % | 0.5 | 0 | 1 |
| Soil Moisture Capacity | % | 0 |
Additions
The relevant Functional Unit area should be equal to the maximum irrigated area plus any undeveloped area. The Undeveloped Area is then calculated internally by Source as the difference between the Functional Unit Area and the Maximum Irrigated Area.
Exceptions
Soil moisture capacity is entered as a parameter in the Rainfall-Runoff Model table, and has been deactivated at the Irrigator Demand Model interface.
Return flows are added to the sub-catchment outflow, not directly to the river.
Features not available or relevant at the Functional Unit level include:
- ordering
- account sharing
- opportunistic water
- forecasting