Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Overview

The Single Simulation Runner runs a single eWater Source scenario.

eWater Source Project Setup

The eWater Source project must already be created, and the desired Running Configuration must already be configured.

Job Setup

Choose Project File

Click "Choose Project File" and select the eWater Source project file (*.rsproj) that you wish to run. It may take a few seconds for the file to upload.

Once the eWater Source project file has uploaded, the Single Simulation Runner configuration options will be displayed.

Contents

Source Project

The Source Project field displays details of the loaded project and allows the user to select a scenario and running configuration. Table 1 lists the configuration options.

Table 1. Source project options.
Configuration OptionDescription
ScenarioChoose the eWater Source scenario to be run
Running Configuration

Choose which Source Running Configuration should be simulated.

Currently, the Run Manager is only designed to be used with Single Simulation.

Job Outputs

Choose which outputs the user would like to store and be able to access on completion of the job.

Queue

The Queue enables the user to configure the job details and estimate costs. Table 2 lists the configuration options.

Table 2. Queue options.
Configuration OptionDescription
Job NameThe name given to the job when viewed in the Run Manager
Agent EndpointsChoose which type of agents should be used to run the job
Number of AgentsChoose the maximum number of agents used to run the job
Model Run Estimate (Minutes)(Optional) The user's estimate of how long it will take to run the Source project once
Estimate(Optional) Estimates the costs of running the job based on the user's Model Run Estimate, the selected agents, and the job type.
QueueAdds the job to the queue of jobs to be run
  • No labels