A Source model consists of two parts - a project and one or more scenarios. A project is a wrapper for a collection of one or more scenarios. It identifies the project name, description, and any scenarios associated with the project. You can only have one project file open at a time and you should not open the same project file using more than one copy of Source.

A scenario is the representation of a node-link network in Source. The relationship between a project and a scenario is shown in Figure 5.

Figure 5. Projects and scenarios

A scenario describes the major processes in a river system or catchment that are modelled. This includes catchment and sub-catchment definition, rainfall runoff and constituent generation models, data sets and parameters. You can create multiple scenarios to:

Break complex projects into distinct parts; or
Duplicate existing scenarios to conduct what-if experiments without disrupting the original.

Any change to the definition of sub-catchments, node-link network, FUs, or the models within FUs, forms a new scenario. Similarly, a different set of inputs or parameters can be used to set up a new scenario, such as a change in land use or a climate change.

Projects

Creating a new project

To create a new project, do one of the following:

Choose File » New » Project...;
Click New Scenario on the File toolbar; or
Press Ctrl+N on your keyboard.

You can only have one project file open at a time. Do not try to open the same project file using more than one copy of Source because you may lose your work.

In the resulting window (Figure 1), enter the following:

The project name. Give it a meaningful name or accept the default;
The scenario name. Once again, provide a meaningful name or accept the default. All the scenarios in a project must have unique names;
Choose the desired kind of scenario (refer to About scenario types for the different types available); and
Click OK.

Figure 1. New Project dialog

Saving a project

To save an open project, choose File » Save. This saves a project file with the extension *.rsproj. If it is the first tiime you are saving your project, the Save As dialog opens and gives you the opportunity to choose the location and name of your project file. By default, the name of the file is the name of your project. If you wish to save a different version of your file, choose File » Save As...

Note: Despite the *.rsproj file extension, Source project files are *.zip archives. Because of this, you should be careful when sending project files as email attachments, or when downloading project files from web-based sources using the HTTP protocol. Email filters often do not allow *.zip files when they cannot interpret the contents, and both servers and browsers often unpack *.zip archives after downloading them.

Closing an open project

To close an open project, choose File » Close project. This closes the current project and prompts to save your work (Figure 2). Click the appropriate button.

Figure 2. Close project

Opening an existing project

To open an existing project, either:

Choose File » Open Project; or
Click Open Project on the File toolbar.

This opens the standard Windows™ open dialog (Figure 3). Note that opening a new project prompts you to save any open project.

Figure 3. Open project

Copying projects

You can duplicate existing projects by copying them. In your local machine's File Explorer, select the desired project, right-click and choose Copy. In the target location, right-click and choose Paste.

Scenarios

About scenario types

Three scenarios have been described in this guide:

A schematic scenario is primarily concerned with modelling longer time-scales;
An operations scenario is primarily concerned with shorter time-scales. It utilises facilities for forecasting and working with unaccounted differences, and typically makes heavy use of the Tabular Editor; and
A catchments scenario which deals with the management of upland catchment processes. It is usually constructed using the Geographic Wizard for catchments which is a structured sequence of steps that guides you through the construction process.

It is important to choose the correct type of scenario before you start building your model. Although a project can contain several scenarios, a scenario type is fixed once it is created and cannot be changed later. Note that scenarios are independent of each other; a change in one scenario does not impact another scenario.

The operations described for a project (above) are also available for scenarios. In addition, you can also import and compare scenarios.

Note: The Scenario Import and Scenario Difference tools can only be used for scenarios that have been created in the version you are currently using, or in previous versions.

Working with scenarios

Scenario management

Various menu items allow you to manage scenarios at a high-level.

When running different scenarios, you can use scenario input sets to set values for input parameters. Choose Edit » Scenario Input Sets... to open the dialog;
Tools » Export summary... allows you to save a text archive of the chosen scenario to a .csv file; and
Feature Table (accessible via Edit » Feature Table...) provides an overview of the selected scenario, and can be used to edit component parameters.

Creating a scenario

Note: You can only create a schematic or catchments scenario using the method outlined below. To create a forecasting scenario, refer to Creating a scenario.

A project must contain at least one scenario. Whenever you create a new project, you are also prompted to create a scenario. You can create additional scenarios using any of the following methods:

Choose File » New » Scenario...;
Click New Scenario on the File toolbar; or
Click New Scenario (by menu) on the Project Explorer toolbar.

To create an Operations scenario, first create a Schematic scenario. Then, choose Tools » Rivers Operations to open the River Operations dialog.

Opening a scenario

When a project only contains one scenario, that scenario is opened automatically when you open the project. However, when a project contains more than one scenario, you must open each scenario individually. To view a scenario that is contained within a project, double click the scenario name from the list in the Project Hierarchy. This opens the appropriate editor for the selected scenario, and changes the scenario name to a bold appearance so that you know it is the current, or active scenario.

You can also select a scenario from the list of loaded scenarios on the View menu. Selecting a scenario from the list makes it active.

Source supports backward compatibility for projects created in Source after v3.1.0.

Note: You must upgrade a project if it was created in Source v3.1.0 or earlier. If you open these projects in later versions of Source, an error message (shown in Figure 4) will appear prompting you to save in v3.1.0. Follow the steps outlined in the dialog to automatically upgrade the project to the current version of Source.

Figure 4. Opening a project, error

Copying a scenario

You can duplicate existing scenarios, provided they are part of the same project. You may want to do this if you wish to experiment with variations without affecting your original scenario.

Note: To copy only certain network elements, refer to Copying network elements.

To duplicate a scenario, click Copy Scenario on the Project Explorer toolbar. Source makes a copy of the current scenario and asks you to name the copy (as shown in Figure 5). You can either accept the proposed name or supply one of your own. Keep in mind that scenario names must be unique within a project.

The new (copied) scenario will be a duplicate of the original at the time of the copy.

Figure 5. Copy Scenario

Renaming a scenario

Source automatically gives new scenarios the default name of "Scenario #n" , where n is a number. To rename a scenario:

Select the scenario in the Project Hierarchy; and
Once the scenario name is selected, pause then click again. When the entry is highlighted, you can enter a new name. Remember that scenario names must be unique within a project.

Linking scenarios

You can link two scenarios using a Connecting Models. Note that some components of the first scenario may not pass on to the second, linked scenario.

Comparing Scenarios

The full version fo Source has functionality for determining the difference between scenarions. For more information please see Troubleshooting and Debugging.

Copying network elements

When copying a partial scenario, the effect on each network element is different, see Nodes and Links - Copying and pasting.

Audit Log

Figure 1. Audit Log Commit Message

The audit log keeps track of the changes made to a project over time. This is particularly important for projects that are worked on by multiple people. It contains a combination of software generated information on model changes and provides an opportunity for users to annotate the purpose of those changes with a commit message when the project is saved.

Commit messages are used to group software generated logs in a way that makes sense to users working on the project. If the same issue is being worked on in multiple concurrent sessions, you can select Merge with current task to group the logs under the previous commit message.

Figure 2. Audit Log Viewer

A large audit log attached to a project can become a processing burden, especially in the case of large projects. Audit logging is on by default, but can be disabled in Edit »Project Options» Audit Log Settings by toggling off Enable Logging.

Figure 3. Project Options, Audit Log Settings

Click Clear Audit Log to delete all existing entries in the audit log. This can be useful if you have finished one stage of modelling (eg. building your model) and now want to monitor the changes made to the project from this point forward. Before clearing the log you can export the existing entries by opening the Audit Log Viewer (select View » Audit Logs...), right-click on a cell and choose Copy All and paste contents into a text file or Excel file.

It is possible to permanently turn on the audit log, by toggling on Force Comment on Save. You will no longer be able to toggle Enable Logging, and Clear Audit Log will also be disabled. This is a permanent project change, and you will recieve several warning messages asking you to confirm before the change is made.

Browser not supported