Source has a set of Assurance Rules that provide optional checks of models, accessible via Edit » Scenario Options. Assurance Rules define and detect unacceptable states in the model, increasing the confidence that the user can have in the model and the output data. Users can customize Assurance Rules in Source by choosing the severity of the notification if an Assurance Rule is not met by the model. Further customization is possible by creation of plugins that define custom Assurance Rule(s). Functions with /wiki/spaces/SD510/pages/54593508 may also be used for validation and logging at custom notification levels.

Figure 1. Scenario Options, Assurance Rules

The notification level of each rule can be set using the drop down menu next to each rule. The outcome of each notification level is summarised in Table 1.

Performance Improvement

Performance can be improved by setting the notification level of an assurance rule to Off, then Source will not check that rule when the model is run. Alternatively, if Enabled is toggled off, all Assurance Rules are set to Off, and are not checked.

Care should be taken when turning off any or all assurance rules. Turning them off is not recommended during model building, but would be useful for calibrating or running replicates.

Table 1. Assurance Rules, Notification levels

Notification level	Symbol	Outcome
Off	–	The rule is not checked. This will improve performance.
Info		Message logged in the Log Reporter for each instance in which the rule is not met.
Warning		Message logged in the Log Reporter for each instance in which the rule is not met.
Error		Message logged in the Log Reporter for each instance in which the rule is not met.
Fatal		If the rule is not met, the model will stop running.

Assurance Rules and their associated notification levels apply to all model elements in the Scenario. If custom validation and/or differing notification levels are required on a per model basis, then Functions with /wiki/spaces/SD510/pages/54593508 may be used in addition to Assurance Rules.

Each Assurance Rule is described in Table 2.

Table 2. Assurance rule definitions

Assurance Rule Category	Definition
Advanced use	All file data sources used in the current input set are checked to ensure they each have a time series assigned to that input set. Nodes are checked to ensure only confluences have multiple upstream links.
Continuous Accounting	Allocation priorities are checked to ensure they match the priorities of the account types.
Functions	Function result units must be commensurate with their usages: All functions that are used as an input for a /wiki/spaces/SD510/pages/54593508 (eg. nodes, links) are checked to ensure that the result units configured for the function in Function Editor are commensurate with the usage units. For example, a function used as input for an Inflow node, should be set in Function Editor. Modelled variable units must be commensurate with their assigned model property: All modelled variables that are used by a function used in the scenario are checked to ensure that the units configured for the modelled variable in Function Editor are commensurate with the units for the /wiki/spaces/SD510/pages/54593508 (eg. nodes, links) property. A Time of Evaluation must be set for Functions (unless constant), and variables set to Specify ToE All functions and variables, which are "used" and non-constant, are checked if a time of evaluation is set. Specifically: A function that is "used" and non-constant must have at least one Time of Evaluation (ToE) selected. Timestep evaluated variables (modelled and context variables) that are a) used by a "used" function and b) set to Specify ToE, must similarly have a ToE specified. A function is considered used if: it has a usage (e.g. on an Inflow node's Additional Flow property); it has Force Evaluate turned on; or it is referenced by a function meeting one of the above conditions (recursively); /wiki/spaces/SD510/pages/54593508 are excluded from this rule.
Mass Balance	Mass balance is checked to ensure it is within the tolerance limit for the entire network and for each catchment, link and node. For example, the rule checks that a node's loss does not exceed inflow. The default tolerance limit is 1 ML, this limit can be changed by navigating to Tools *» Application Settings...*.
Nodes	Storage dimensions are checked to ensure that each level and volume is greater than the previous level and volume. Surface area is checked to ensure that it is greater than or equal to the previous surface area.
Ordering	For constraints, the rule will fail if any constraint exists where: Minimum is infinity; or Minimum is 'NaN' (not a number) eg. divide by 0; or Maximum has a value and that value is NaN. For orders, the rule will fail if: Any order has a total order volume of infinity; or Any order has a total order volume of NaN; or Any order has an owner that is not part of its upstream ownership system; or Priority ordering is enabled, and: any priority is negative; or any priority is NaN; or the sum of all priorities is not one. Note, these rules are primarily for debugging purposes, and are set to a notification level of 'None' by default.
Outflow	Negative flows are checked for downstream of each node and link.
Ownership	Ownership proportions are checked to ensure they sum to 1
Storage Routing Ordering	Checks that the travel time on Storage Routing links is not infinity or negative. This can happen if the representative regulated flow rate for the storage routing link has not been set (in Storage Routing Feature Editor, Avg. Reg Flow = 0 and storage exponent m ≠ 1).

Browser not supported