Monthly pattern demand model SRG

The monthly demand node is suitable for representing demands when these can be assumed to follow a fixed monthly pattern. A typical application might be to represent the demand pattern for a town water supply; another application might be to represent the demand pattern for irrigated paddy rice in a wet tropical environment. It can be used when modelling both unregulated and regulated river systems.

Scale

Implemented at the site scale.

Principal developer

eWater

Scientific provenance

Providing a pattern of monthly demands as input data is a basic, and well established, approach in river and water supply system, and storage behaviour modelling.

Version

Source version v4.3

Dependencies

A Water User node is required by Source to access the monthly demand pattern node.

Theory

The monthly demand pattern is input as a set of twelve values of monthly volumes expected to be delivered at the demand node (see Parameters and settings). When a model time-step of less than one month is being used (eg. daily) the value for a given month is distributed evenly across all time-steps in that month.

The Monthly Demand node provides a demand value to the Water User node at every model time-step. When modelling a regulated system, the Water User node supplies the Monthly Demand node with a value of maximum travel time (expressed in numbers of model time-steps). At a given model time-step, the demand value provided is the one for the appropriate number of time-steps in advance of the current time-step. When modelling an unregulated system, the demand value provided is the one that is applicable to the current model time-step. More information on how this value is further processed is available in the Water user node section of this Scientific Reference Guide.

Assumptions and limitations

The key assumption is that the demands to be modelled can be adequately represented by a fixed monthly pattern. Amongst other things, while seasonal variations are represented, this assumes the demand in any given month does not change from year to year due to climate variability.

Input data

A fixed pattern of 12 monthly values is input. More information on this and other input data is given in Parameters or settings, below. Full details are provided in the Source User Guide.

Parameters or settings

Model parameters are summarised in Table 1.

Table 1. Model parameters

Parameter	Description	Units	Default	Range
Use Annual Total	There is a Boolean to enable the use of an annual total	Boolean	False	True / False
Use Annual Total	Volume of annual total	ML	0.0	Positive number
Order per month (12 expected)	A value for each moth of what the demand will be	ML	0.0	Positive number
Percentage of Annual Total	When "Use Annual Total" is true, it defines the percentage of the annual Total for each month	%	1/12 * Annual total	Positive number
Return Flow (see note below)	Percentage of volume of water supplied (which may differ from demand)	%
	A fixed volume	ML/month
	A volume defined using a function	ML/month

Output data

Output comprises a time series of flows.

Note that when the return flow is being calculated no mass balance check is carried out. While there should be no potential for a mass balance problem when the return flow is evaluated as a percentage of the water supplied, when either a fixed volume or a volume defined by a function is used there is the potential to cause mass balance problems if an inappropriate value of the fixed volume or an inappropriate function is used.

Source User Guide 5.4

Note: This is documentation for version 5.4 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above