Note: This is documentation for version 5.20 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above">Note: This is documentation for version 5.20 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Conversion process:

The conversion process can be partially automated using a tool. The process to convert projects as are follows:

  1. Install the tool via dotnet cli:
    1. dotnet tool install -g Project2015To2017.Migrate2019.Tool\
  2. Then to run the conversion:
    1. dotnet migrate-2019 wizard old-output-path  C:\src\rm3\riversystem\Solutions\<solution>.sln
  3. Tidy up using regex:

    1.  <ReferencePath>$(RootPath)3rdParty</ReferencePath> → <AssemblySearchPaths>$(RootPath)3rdParty;$(AssemblySearchPaths);</AssemblySearchPaths>

  4. Make additional changes as outlined in Notes for the the New Format below.
  5. Remove duplicate entries which are often added by removing and collapsing the Release and Debug sections.
  6. Remove old junk which isn't needed anymore.

Old Format:

The pre visual studio 2017 format that was used by source before 2020 was maintained by ProjectChecker.exe on teamcity (and locally).

The core settings that were maintained were:

  • Target Framework - .Net 4.8
  • Tools Version - 15.0
  • LangVersion - C# 7.3, VB 15
  • General settings including WarningLevel, NoWarn, Prefer32Bit, Debug symbols, Optimize, etc.
  • RootPath - the root of our folder structure which all of our repository folders sit in; defined as a relative path from the project file location.
  • Import NormailsePdbBuildRoot targets
  • Output paths
    • Core projects -> $(RootPath)Output
    • Core Plugin projects -> $(RootPath)Output\Plugins
    • Community Plugin projects -> $(RootPath)Output\Plugins\CommunityPlugins
  • ReferencePath (output path isn't needed to be included as it's automatically used)
    • Core projects -> $(RootPath)3rdParty
    • Plugins -> $(RootPath)Output;$(RootPath)3rdParty
  • Project references
    • Convert dll references to project references if within same solution
    • Convert project references to dll references if within different solution (cannot use project references as the the build configuration to use is defined in the solution not the project i.e. debug will be used by default when building release)
    • Set copy local (private) to false
  • Dll references
    • Remove version and PublicKeyToken information
    • Remove HintPath
    • Set specific version to false
    • Set copy local (private) to false if part of .Net framework
    • Source solution
      • Set copy local (private) to true if not part of .Net framework
    • Plugins solution
      • Set copy local (private) to false if project from Source solution
      • Set copy local (private) to false if (directly) referenced by project from Source solution
      • Set copy local (private) to true for everything else (i.e. only referenced by a plugin)

Note: ProjectChecker.exe was only run on Source.sln and SourceCommunityPlugins.sln (i.e. doesn't get run on the Not to be distributed plugins).

 Old csproj example
Old TIME.csproj
<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Build" ToolsVersion="15.0">
  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
  <PropertyGroup>
    <ProjectGuid>{EEC5CF45-EBEE-4CEB-9335-A383C4749688}</ProjectGuid>
    <OutputType>Library</OutputType>
    <RootNamespace>TIME</RootNamespace>
    <AssemblyName>TIME</AssemblyName>
    <StartupObject />
    <TargetFrameworkVersion>v4.8</TargetFrameworkVersion>
    <LangVersion>7.3</LangVersion>
    <NoWarn>1591,1587</NoWarn>
    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
    <WarningLevel>4</WarningLevel>
    <RootPath>$(MSBuildThisFileDirectory)..\..\</RootPath>
    <ReferencePath>$(RootPath)3rdParty</ReferencePath>
    <OutputPath>$(RootPath)Output</OutputPath>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <OutputPath>$(RootPath)Output</OutputPath>
    <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
    <BaseAddress>285212672</BaseAddress>
    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <DebugSymbols>true</DebugSymbols>
    <FileAlignment>4096</FileAlignment>
    <NoWarn>1591,1587</NoWarn>
    <Optimize>false</Optimize>
    <RemoveIntegerChecks>false</RemoveIntegerChecks>
    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
    <WarningLevel>4</WarningLevel>
    <DebugType>portable</DebugType>
    <ErrorReport>prompt</ErrorReport>
    <CodeAnalysisRuleSet>AllRules.ruleset</CodeAnalysisRuleSet>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <OutputPath>$(RootPath)Output</OutputPath>
    <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
    <BaseAddress>285212672</BaseAddress>
    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
    <DefineConstants>TRACE</DefineConstants>
    <DebugSymbols>false</DebugSymbols>
    <FileAlignment>4096</FileAlignment>
    <NoWarn>1591,1587</NoWarn>
    <Optimize>true</Optimize>
    <RemoveIntegerChecks>false</RemoveIntegerChecks>
    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
    <WarningLevel>4</WarningLevel>
    <DebugType>portable</DebugType>
    <ErrorReport>prompt</ErrorReport>
    <CodeAnalysisRuleSet>AllRules.ruleset</CodeAnalysisRuleSet>
  </PropertyGroup>
  <ItemGroup>
    <Reference Include="CsvHelper">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="gdal_csharp">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="LZ4">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="MathNet.Numerics">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="Microsoft.CSharp">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="Microsoft.Office.Interop.Excel">
      <EmbedInteropTypes>True</EmbedInteropTypes>
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="Microsoft.Practices.EnterpriseLibrary.Common">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="Microsoft.Practices.EnterpriseLibrary.Validation">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="Newtonsoft.Json">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="ogr_csharp">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="PresentationCore">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Core">
      <RequiredTargetFramework>3.5</RequiredTargetFramework>
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Data">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Drawing">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Reactive">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
    <Reference Include="System.Runtime.Serialization.Formatters.Soap">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Xml">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <ProjectReference Include="..\TIME.NetCDF\TIME.NetCDF.csproj">
      <Project>{D3F02F27-C0B1-4ED9-86D3-AA1733270179}</Project>
      <Name>TIME.NetCDF</Name>
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </ProjectReference>
    <Reference Include="PresentationFramework">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.ComponentModel.DataAnnotations">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.IO.Compression">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Windows.Forms">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="System.Xaml">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="WindowsBase">
      <SpecificVersion>False</SpecificVersion>
      <Private>False</Private>
    </Reference>
    <Reference Include="SciChart.Charting">
      <SpecificVersion>False</SpecificVersion>
      <Private>True</Private>
    </Reference>
  </ItemGroup>
  <ItemGroup>
    <Compile Include="BinarySerializer.cs" />
    <!-- Compiles removed for reability --> 
    <Compile Include="Properties\AssemblyInfo.cs" />
    <Compile Include="Properties\Resources.Designer.cs">
      <AutoGen>True</AutoGen>
      <DependentUpon>Resources.resx</DependentUpon>
      <DesignTime>True</DesignTime>
    </Compile>
    <Compile Include="DataTypes\IO\CsvFileIo\GeneralCsvFileIo.Load.cs" />
    <Compile Include="DataTypes\IO\CsvFileIo\TimeSeriesInfo\BigModTimeseriesInfo.cs" />
    <None Include="key.snk" />
    <None Include="Properties\Settings.settings">
      <Generator>SettingsSingleFileGenerator</Generator>
      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
    </None>
    <Compile Include="Properties\Settings.Designer.cs">
      <AutoGen>True</AutoGen>
      <DependentUpon>Settings.settings</DependentUpon>
      <DesignTimeSharedInput>True</DesignTimeSharedInput>
    </Compile>
    <Compile Include="Science\Algebra\Algorithms.cs" />

    <Compile Include="Science\Mathematics\Functions\InterpolatedFunction.cs">
      <SubType>Code</SubType>
    </Compile>
    <Compile Include="Science\Mathematics\Functions\LinearPerPartFunction.cs" />
    <Compile Include="Science\VectorOperations\PolygonTools\Winding.cs" />
    <Compile Include="Science\VectorOperations\UnionGEORegions.cs" />
    <None Include="Science\Statistics\ClassDiagram.cd" />
    <RootContent Include="Resources\GDAL\coordinate_axis.csv" />
    <RootContent Include="Resources\GDAL\datum_shift.csv" />
    <RootContent Include="Resources\GDAL\ellipsoid.csv" />
    <RootContent Include="Resources\GDAL\gcs.csv" />
    <RootContent Include="Resources\GDAL\gcs.override.csv" />
    <RootContent Include="Resources\GDAL\gdal_datum.csv" />
    <RootContent Include="Resources\GDAL\gt_datum.csv" />
    <RootContent Include="Resources\GDAL\gt_ellips.csv" />
    <RootContent Include="Resources\GDAL\pcs.csv" />
    <RootContent Include="Resources\GDAL\pcs.override.csv" />
    <RootContent Include="Resources\GDAL\prime_meridian.csv" />
    <RootContent Include="Resources\GDAL\projop_wparm.csv" />
    <RootContent Include="Resources\GDAL\s57agencies.csv" />
    <RootContent Include="Resources\GDAL\s57attributes.csv" />
    <RootContent Include="Resources\GDAL\s57attributes_aml.csv" />
    <RootContent Include="Resources\GDAL\s57attributes_iw.csv" />
    <RootContent Include="Resources\GDAL\s57expectedinput.csv" />
    <RootContent Include="Resources\GDAL\s57objectclasses.csv" />
    <RootContent Include="Resources\GDAL\s57objectclasses_aml.csv" />
    <RootContent Include="Resources\GDAL\s57objectclasses_iw.csv" />
    <RootContent Include="Resources\GDAL\stateplane.csv" />
    <RootContent Include="Resources\GDAL\unit_of_measure.csv" />
  </ItemGroup>
  <ItemGroup>
    <Service Include="{82A7F48D-3B50-4B1E-B82E-3ADA8210C358}" />
    <Service Include="{B4F97281-0DBD-4835-9ED8-7DFB966E87FF}" />
  </ItemGroup>
  <ItemGroup>
    <BootstrapperPackage Include="Microsoft.Net.Client.3.5">
      <Visible>False</Visible>
      <ProductName>.NET Framework 3.5 SP1 Client Profile</ProductName>
      <Install>false</Install>
    </BootstrapperPackage>
    <BootstrapperPackage Include="Microsoft.Net.Framework.2.0">
      <Visible>False</Visible>
      <ProductName>.NET Framework 2.0 %28x86%29</ProductName>
      <Install>false</Install>
    </BootstrapperPackage>
    <BootstrapperPackage Include="Microsoft.Net.Framework.3.0">
      <Visible>False</Visible>
      <ProductName>.NET Framework 3.0 %28x86%29</ProductName>
      <Install>false</Install>
    </BootstrapperPackage>
    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5">
      <Visible>False</Visible>
      <ProductName>.NET Framework 3.5</ProductName>
      <Install>false</Install>
    </BootstrapperPackage>
    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
      <Visible>False</Visible>
      <ProductName>.NET Framework 3.5 SP1</ProductName>
      <Install>true</Install>
    </BootstrapperPackage>
    <BootstrapperPackage Include="Microsoft.Windows.Installer.3.1">
      <Visible>False</Visible>
      <ProductName>Windows Installer 3.1</ProductName>
      <Install>true</Install>
    </BootstrapperPackage>
  </ItemGroup>
  <ItemGroup>
    <Folder Include="Resources\Toolkit\" />
  </ItemGroup>
  <ItemGroup>
    <EmbeddedResource Include="Resources\FinderBlackList.txt" />
  </ItemGroup>
  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
  <Import Project="$(RootPath)RiverSystem\Solutions\PostAndPreBuildScript.targets" />
  <Import Project="$(RootPath)RiverSystem\Solutions\IncludeGlobalAssembly.targets" />
  <Target Name="CopyRootContent" AfterTargets="AfterBuild">
    <Copy DestinationFolder="$(OutputPath)" SourceFiles="@(RootContent)" SkipUnchangedFiles="true" />
  </Target>
  <Import Project="$(RootPath)RiverSystem\Solutions\NormalisePdbBuildRoot.targets" />
</Project>


New Format:

The new format released with Visual Studio 2019.

Main changes are:

  • cs files are included by default. They need to be included if you are doing special things with them (e.g. linking xaml files to their cs backing file)
  • project references now bring in implicit references of what it references (e.g. A →B and B → C, now A implicitly references C)
    • this includes everything C references as well (e.g. if C reference wpf then A will reference wpf)
  • Choose/When msbuild constructs don't seem to work the same
  • AssemblySearchPaths is used instead of ReferencePaths

Things to look for during dev review:

  • TargetFramework - net48
  • LangVersion - 7.3
  • NoWarn - 1591,1587
  • RootPath - depends on csproj and sln location
  • AssemblySearchPaths - includes RootPath/3rdParty
  • OutputPath - RootPath/Output
  • AssemblyTitle - not needed if the same as the csproj file name (minus the extension)
  • <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.props" /> is set
  • <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.targets" /> is set
  • <Import Project="$(RootPath)RiverSystem\Solutions\SDKIncludeGlobalAssembly.targets" /> is set
  • <Import Project="$(RootPath)RiverSystem\Solutions\IncludeGlobalAssembly.targets" /> is not set
  • <Import Project="$(RootPath)RiverSystem\Solutions\NormalisePdbBuildRoot.targets" /> is set
  • References to projects within the same solution are set using ProjectReference entires e.g. <ProjectReference Include="..\TIME\TIME.csproj" />
  • dll references are set with
    • private = false
    • specific version = false


Notes:

  • <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.props" />
    • AppendTargetFrameworkToOutputPath, AppendRuntimeIdentifierToOutputPath and WarningsAsErrors are set by SDK.build.props
      • this is to stop the /win/x64 folders from being generated
  • <Import Project="$(RootPath)RiverSystem\Solutions\SDKIncludeGlobalAssembly.targets" />
    • to set the global assembly - no AssemblyInfo.cs is required anymore - these properties are set in the csproj file now
  • <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.targets" />
    • Copy 3rdParty to output is done via the SDK.build.targets
      • this is done since the Choose/When directives don't seem to work when running the builds via cake/msbuild (they work ok with visual studio 2017/2019)
  • <Import Project="$(RootPath)RiverSystem\Solutions\NormalisePdbBuildRoot.targets" />
    • to configure the normalization of pdb build paths
  • Compile Remove="file.cs" should be deleted and the "file.cs" should be deleted from the git repo as well.
  • For projects containing WPF or WinForms make the the following changes:
    • Change the SDK from "Microsoft.NET.Sdk" to "MSBuild.Sdk.Extras/3.0.38" (from https://www.nuget.org/packages/MSBuild.Sdk.Extras)
    • For WPF add <UseWPF>true</UseWPF> to the PropertyGroup
    • For WinForms add <UseWindowsForms>true</UseWindowsForms> to the PropertyGroup
    • Remove EmbeddedResource entreies for ".resx" files and the associated Compile of ".designer.resx" files
    • Remove Compile entries of ".cs" UserControl, Form and Component files and associated ".designer.cs" files
    • Remove Compile entries of ".xaml.cs" files and associated ".xaml" Page files

  • Add entries using wildcards for resources if they exist similar to the following:

      <ItemGroup>
    <EmbeddedResource Include="Persistence\Mappings\*.hbm.xml" />
    <EmbeddedResource Include="Persistence\SchemaUpgrades\*.sql" />
    <Resource Include="Resources\**\*">
      <Pack>True</Pack>
    </Resource>
  </ItemGroup>


    • Remove individual entries for resources

Example:

 New csproj example
<Project Sdk="Microsoft.NET.Sdk">
  <PropertyGroup>
    <TargetFramework>net48</TargetFramework>
    <LangVersion>7.3</LangVersion>
    <RootPath>$(MSBuildThisFileDirectory)..\..\</RootPath>
    <AssemblySearchPaths>$(RootPath)3rdParty;$(AssemblySearchPaths);</AssemblySearchPaths>
    <OutputPath>$(RootPath)Output</OutputPath>
    <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
    <RemoveIntegerChecks>false</RemoveIntegerChecks>
    <FileAlignment>4096</FileAlignment>
    <CodeAnalysisRuleSet>AllRules.ruleset</CodeAnalysisRuleSet>
    <BaseAddress>285212672</BaseAddress>
  </PropertyGroup>
  <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.props" />
  <Import Project="$(RootPath)RiverSystem\Solutions\SDK.build.targets" />
  <Import Project="$(RootPath)RiverSystem\Solutions\SDKIncludeGlobalAssembly.targets" />
  <Import Project="$(RootPath)RiverSystem\Solutions\NormalisePdbBuildRoot.targets" />
  <ItemGroup>
    <Reference Include="Microsoft.Practices.EnterpriseLibrary.Validation">
      <Private>True</Private>
      <SpecificVersion>False</SpecificVersion>
    </Reference>
    <Reference Include="System.ComponentModel.DataAnnotations">
      <Private>False</Private>
      <SpecificVersion>False</SpecificVersion>
    </Reference>
  </ItemGroup>
  <ItemGroup>
    <ProjectReference Include="..\TIME\TIME.csproj" />
    <ProjectReference Include="..\TIME.Tools\TIME.Tools.csproj" />
  </ItemGroup>
  <ItemGroup>
    <None Include="AWRA\AWRA.cd" />
  </ItemGroup>
</Project>
  • No labels