...
Figure 1. Insight user interface
| Info |
|---|
Note: Prior to using Insight, ensure that you have created and saved a Source project containing one scenario only. |
...
Insight can be configured, set up (to create a settings file) and run using the command line as well. This link shows some examples of how to use the command line for Insight. Note that an explanation of these commands is provided further down:
| Info | ||
|---|---|---|
| ||
Note: Additional help for the command line is available using the following command. Once in the Insight directory, enter the following: hindsight.exe --help |
...
- Each individual machine must have Source installed; and
- The project file will need to be located on a server where all machines can access it.
| Note |
|---|
| Note: if If you are using a Windows 7 machine as an endpoint, you may need to relocate Source out of Program Files to avoid folder access issues. For example, move Source to C:\Source 3.3.0. |
...
Once the settings file has been configured (along with endpoints if you are using them), set up the optimisation run itself.
| Note |
|---|
| Note: The location of the Source project must be in a location accessible to all endpoints (for example, a local server). |
...