...
Here you configure the constituent generation models for each FU/sub-catchment//constituent combination. Configuring constituent models provides details on how to do this.
...
To assign a routing model to a link, click on the link and choose a routing model from the routing model drop-down menu. You can use the Apply-to options to apply the same link model to other links in the network. Figure 10 shows the available routing and in-stream processing models. To assign in-stream processing models to the links, click on the desired link, and choose the appropriate model from the drop-down menu in the Model column. Click Edit... to configure parameters for each of storage routing only. Lag routing will need to be parameterised at the next step.
For details on the available routing and in-stream processing models, see the Source Scientific Reference Guide. The items in the contextual menu have the same function as that described in the network definition step.
Click Apply To All Apply To All to apply the configured settings to all links.
To check which model has been assigned to a link, click on the link. The link model will be displayed in the Routing model pull-down list. Click Next when the desired models have been assigned to all links.
...
This functionality is yet to be documented, if you would like assistance please call 1300-5-WATER (1300-592-837). Relevant to GWLag Plugin.
Assigning nodes
The default node type in Source is a confluence node, where the inputs to the node are the upstream sub-catchment outlets, and the output from the node is the current sub-catchment outlet. To change the node model type, right click on the confluence node in the Geographic Editor, then choose Change Node Model from the contextual menu. This lists all the model types available. Choose the required model.
...
Once a scenario has been created it can be edited using the Edit menu.
| Info | ||
|---|---|---|
| ||
| Note: After a scenario has been created using the wizard, you cannot change the network, ie. you cannot merge or remove sub-catchcment. |
The Edit menu gives you access to all the elements of a scenario that can be modified. Refer to the Constituents and Rainfall runoff models chapters for further details.
| Info | ||
|---|---|---|
| ||
| Note: If the FU list and areas are modified, the models, parameters and climate input data associated with them (ie. rainfall runoff, constituent generation and filter models) will be modified as well. Check that any of these models, parameters and input data are assigned correctly. |