Note: This is documentation for version 5.16 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above">Note: This is documentation for version 5.16 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Urban Configuration

The Urban Configuration option runs a single Urban Scenario.







Outputs are produced according to the recorders selected in the Parameters pane of the main Source user interface. Recorded results are viewed in the Source Results Manager

Urban Combination Configuration

The Urban Combination simulation is designed to be used when linking Urban Developer with Source River System Scenarios.

The user configures a single Behavioural Water Use node as a template representing a typical household type (such as an apartment, or detached house with a rainwater tank). The Urban Combination simulation generates a database of the average water demand for every combination of occupancy and end usage type defined in the scenario. 

To use the Urban Combination Configuration:

  1. Exactly one behavioural demand node must be present in the scenario (roof and tank nodes can also be present)
  2. Configure the demand node (and tank and roof nodes, if present) to represent a single dwelling. 
  3. Ensure Sampled Appliance and Occupancy is disabled (it will be disabled by default)
  4. Choose the Urban Combination Configuration
  5. Run the model.

The Urban Combination results will be available from within Source River System Scenarios within the same Source project file and can be used to configure Urban Water User nodes with customised distributions and dwelling numbers.

  • No labels