Note: This is documentation for version 5.0 of Source. For a different version of Source, select the relevant space by using the Spaces menu in the toolbar above
Flux - SRG
- asatheesh (Unlicensed)
- teamcity (Deactivated)
Owned by asatheesh (Unlicensed)
20 Nov 2019
1 min read
Loading data...
Within Source a number of different methods can be used to model the fluxes along a river reach. These can occur on a link - adding flows (Adding Flows SRG) or water demands (Water Demands SRG) - or be modelled by a node such as a Loss Node (Loss node - SRG).
This section describes the Fluxes along routing links. How these fluxes are modelled is described further in the chapter Link storage routing - SRG. Available methods include:
- Loss/Gains, which is described in the General purpose function section of the Link storage routing - SRG
- Timeseries Flux, which is described in the General purpose time series section of Link storage routing - SRG, and
- Groundwater, which is described in the Groundwater sections of Link storage routing - SRG and the Groundwater - SRG
Where constituents are modelled, parameters can be set for:
- Additional Inflow load,
- Groundwater, and
- Timeseries Flux
How constituents are routed through a link is described in Constituent Routing - SRG.